-
鉛蓄電池 6V-4.5Ah 70x48x106mm
¥2,420
電圧: 6V 通常容量(20hr): 4.5h 端子: B-T1 寸法: 70 x 48 x 106mm 53247
MORE -
鉛蓄電池 6V-1.3Ah 98x25x56mm
¥2,750
・用途:アラームシステム, UPS, パワーツール, 防犯器、おもちゃなどに。 ・シールド密封ABS容器 ・メンテナンスフリー ・放電後の充電回復強化と保管時の低放電特性 電圧: 6V 通常容量(20hr): 1.3Ah 端子: B-T1 寸法: 98 x 25 x 56mm 52840
MORE -
鉛蓄電池12V-12Ah
¥11,880
・シールド、リーク保護ABSケース ・メンテナンスフリー ・ディープ放電レカバリパフォーマンス ・電圧: 12VDC ・通常容量(20hr): 12Ah ・端子: D-T2 ・寸法: 150 x 97 x 99mm 17960
MORE -
鉛蓄電池 12V-3.3Ah(133.5x67x67mm)DAS12-3.3
¥5,200
・用途:アラームシステム, UPS, パワーツール, 防犯器、 おもちゃなどに。 ・シールド密封ABS容器 ・メンテナンスフリー ・放電後の充電回復強化と保管時の低放電特性 電圧:12Vdc 名目容量(20hr):3.3Ah 寸法:約133.5x67x67mm 重量:約1.4kg 57394
MORE -
鉛蓄電池保護ユニット12.0V(0~10A)
¥4,950
・12Vで電圧カットしてバッテリーを保護します。復帰は12.7V以上で自動復帰 入力: 電圧レギュレーション:DC11.2V~12.6V 電流レギュレーション:0A~10A 機能: 低電圧出力カット:12V 電源ON/OFFスイッチ リモートON/OFFスイッチ 保護: 入力逆接続(赤LED)、出力逆接続(赤LED) 動作温度:0~+50℃ 本体寸法:約113×68×42mm 重量:約350g 57383
MORE -
鉛蓄電池保護ユニット10.2V&11.0V
¥9,240
入力: 電圧レギュレーション:DC11.2V~12.6V 電流レギュレーション:0A~40A 機能: 低電圧出力カット:10.2V/11V切換スイッチ 電源ON/OFFスイッチ リモートON/OFFスイッチ 保護: 入力逆接続、出力逆接続 ケーブル長:約50cm 動作温度:0~+50℃ 本体寸法:約113×68×42mm 51790
MORE -
バッテリーガードユニットM148A
¥4,367
動作電圧:12 VDC安定化電源 Max.スイッチング容量:10 A(冷却なし)/20 A(別途冷却機能追加の場合) 遮断電圧:10.4~13.3 V (調節可能) リセット電圧:遮断電圧+0.8 V (± 0.3 V) カットOFFエレメント:パワーMOS 浪費電流:< 0.7 mA(OFF), <1.6 mA(ON) 寸法:約 87 x 60 x 32 mm 51267
MORE -
12/24Vdc対応バッテリーガードユニット M148-24
¥7,590
・設定の電圧で回路をON/OFFすることでバッテリーを保護するユニットです。 ・動作電圧設定はリニアに調整可能です。 動作電圧:12Vdc/24Vdc(設定する必要はありません) スイッチング容量:20A継続 設定電圧: 12Vdc入力時:1.9.8V/OFF-11V/ON 2.10.2V/OFF-11.4V/ON 3.10.6V/OFF-11.9V/ON 4.10.9V/OFF-12.3V/ON 5.11.3V/OFF-12.7V/ON 24Vdc入力時:1.20V/OFF-21.4V/ON 2.20.8V/OFF-22.2V/ON 3.21.6V/OFF-23V/ON 4.22.4V/OFF-23.9V/ON 5.23.2V/OFF-24.7V/ON カットOFFエレメント:パワーMOSFETをポジティブ部に 機器浪費電流:OFF時<1.2mA ON時<2.4mA 動作状況:LEDで表示 寸法:約87x60x33mm 54654
MORE -
ソーラー充電式超音波夜間動物撃退器
¥24,640
・ソーラーで充電して、設定で夜間6時間や夜間11時間など超音波撃退器を動作させることができます。(コントローラの設定なのでご要望あれば出荷時に設定しておきます。初期値は24時間動作継続設定です) ※外部に設置する際は、ケースに収めるなど工夫ください。 超音波動物撃退器仕様: 消費電流:max. 150 mA 調整周波数範囲:約7 kHz - 38 kHz (サイレンのような動作音) 音範囲:約100 m 音圧: max. 135 dB+/-30% 寸法:約140 x 65 x 37 mm 周波数と目盛(1 kHz = 1000 Hz) 1 - 2: 約8 - 9 kHz | 3:約 9 - 10 kHz | 4: 約0 - 12 kHz | 5: 約12 - 14 kHz | 6:約14 - 16 kHz | 7:約17 - 19 kHz | 8: 約26 - 30 kHz | 9 - 10: 約 38 - 43 kHz 示唆値:鳥: 約10 - 12 kHz | げっ歯類、肉食動物: 約20 - 30 kHz | 虫: 約27 - 38 kHz ※周波数設定は状況を見てご自分で調整ください。 ソーラー充電コントローラ仕様: 定格電圧:12V バルク充電電圧:14.8V フロート充電電圧:13.7V 電圧不足:10.8V 不足からのリカバリ電圧:13V 無負荷電流:<6mA 充電時回路電圧ドロップ:<0.2V 放電時回路電圧ドロップ:<0.1V Max充電電流:3A Max出力電流:3A IPレート:IP22 寸法/重量:約52x22x80mm/約33g 鉛蓄電池仕様: 電圧: 12VDC 通常容量(20hr): 12Ah 寸法: 150 x 97 x 99mm 重量: 4.2kg ※フル充電時には約60時間動作が可能です ソーラーパネル仕様: maxパワー:15W max電圧:18V max電流:0.83A ※本製品の充電池に満充電させるには20時間程必要です。 ※製品のケースや仕様は予告なく変更されることがあります。ご了承ください。 58167 --------------------------------------------------------------------------------------------- Solar-powered ultrasonic nighttime animal repellent - Recharge with solar power and set the ultrasonic repellent to operate for 6 hours at night or 11 hours at night. (This is a controller setting, so we will set it at the time of shipment if you wish. The default setting is for continuous operation for 24 hours.) *When installing outside, please consider putting it in a case. Ultrasonic animal repellent specifications: Current consumption: max. 150 mA Adjustable frequency range: approx. 7 kHz - 38 kHz (siren-like operating sound) Sound range: approx. 100 m Sound pressure: max. 135 dB+/-30% Dimensions: approx. 140 x 65 x 37 mm Frequency and scale (1 kHz = 1000 Hz) 1 - 2: approx. 8 - 9 kHz | 3: approx. 9 - 10 kHz | 4: approx. 0 - 12 kHz | 5: approx. 12 - 14 kHz | 6: approx. 14 - 16 kHz | 7: approx. 17 - 19 kHz | 8: approx. 26 - 30 kHz | 9 - 10: approx. 38 - 43 kHz Suggested values: Birds: approx. 10 - 12 kHz | Rodents, carnivores: approx. 20 - 30 kHz | Insects: approx. 27 - 38 kHz *Please adjust the frequency setting yourself according to the situation. Solar charge controller specifications: Rated voltage: 12V Bulk charge voltage: 14.8V Float charge voltage: 13.7V Voltage shortage: 10.8V Voltage recovery from shortage: 13V No-load current: <6mA Circuit voltage drop during charging: <0.2V Circuit voltage drop during discharging: <0.1V Maximum charging current: 3A Maximum output current: 3A IP rating: IP22 Dimensions/weight: approx. 52 x 22 x 80mm/approx. 33g Lead-acid battery specifications: Voltage: 12VDC Normal capacity (20hr): 12Ah Dimensions: 150 x 97 x 99mm Weight: 4.2kg *When fully charged, it can operate for approximately 60 hours Solar panel specifications: Max power: 15W Max voltage: 18V Max current: 0.83A *It takes about 20 hours to fully charge the rechargeable battery of this product. *Product cases and specifications are subject to change without notice. Thank you for your understanding.
MORE -
ソーラーファン(メタルケースL)+PWMソーラー充電コントローラUSB出力付+鉛蓄電池12V-1.3Ah
¥14,960
・弊社の昼間用ソーラーファン(商品番号:56359)の中継にコントローラと充電池を差し入れることで、ON/OFFスイッチ付で限定時間用途や夜間用に ・約2~3時間でフル充電可能で5~6時間ファンを駆動させることができます。バッテリーやソーラーセルを強化することでご自分の仕様のソーラー充電システム製造に ・USB出力付なので非常時のスマホ充電などにも ※防水仕様ではないので屋外で使用される場合は、ケースに収納するなど工夫が必要です。 ソーラーファン仕様: ソーラーパネル(メタルケース)仕様: 定格出力:19.44V/0.77A /Max.約15W 寸法:約300x310x17mm DCファン仕様: 定格:12Vdc/0.27A 寸法:約120x120x25mm ファンガード、コネクタ付 ケーブル長:約60cm 別売延長コード:1M延長53553/3M延長53554/5M延長56621 コントローラ仕様: 公称システム電圧:12/24 VDC maxコントローラーへのバッテリー電圧:32 V 定格バッテリー電流:10A ※付属ケーブルをご使用の場合は、5A程度までとしてください 充電回路の電圧降下:<=0.26V 放電回路の電圧降下:<= 0.15V 自己浪費:<= 6mA 温度補正:-5 mV /℃/ 2 V 動作温度:-35℃~+55℃ 湿度:<=95%、結露しないこと USBポート:最大5 VDC 1.2 A 端子:4mmsq 寸法:約120.3 x 67 x 21.8 mm 取付穴の直径:約4.5 mm 重さ:約102 g 充電池仕様: 電圧: 12V 通常容量(20hr): 1.3Ah 端子: E-T1 寸法: 96.5 x 45 x 59mm 重量: 0.6kg ※予告なくデザインの一部が変更になることがございます。ご了承ください。 57781 ------------------------------------------------------------------------------------------- Solar fan (metal case L) + PWM solar charging controller with USB output + lead acid battery 12V-1.3Ah - By inserting the controller and rechargeable battery into the relay of our daytime solar fan (product number: 56359), you can use it for limited time use or nighttime use with an ON/OFF switch. - It can be fully charged in about 2 to 3 hours and can run the fan for 5 to 6 hours. By strengthening the battery and solar cell, you can manufacture a solar charging system with your own specifications. - It has a USB output, so it can be used to charge your smartphone in an emergency. * It is not waterproof, so if you use it outdoors, you will need to store it in a case or other ingenuity. Solar fan specifications: Solar panel (metal case) specifications: Rated output: 19.44V/0.77A / Max. approx. 15W Dimensions: Approx. 300 x 310 x 17mm DC fan specifications: Rated: 12Vdc/0.27A Dimensions: Approx. 120 x 120 x 25mm Fan guard, connector included Cable length: Approx. 60cm Extension cord sold separately: 1M extension 53553/3M extension 53554/5M extension 56621 Controller specifications: Nominal system voltage: 12/24 VDC Max battery voltage to controller: 32 V Rated battery current: 10A *If using the included cable, limit to 5A Voltage drop in charging circuit: <= 0.26V Voltage drop in discharging circuit: <= 0.15V Self-dissipation: <= 6mA Temperature compensation: -5 mV /℃/ 2 V Operating temperature: -35℃ to +55℃ Humidity: <= 95%, non-condensing USB port: Maximum 5 VDC 1.2 A Terminal: 4mmsq Dimensions: Approx. 120.3 x 67 x 21.8 mm Mounting hole diameter: Approx. 4.5 mm Weight: Approx. 102 g Battery specifications: Voltage: 12V Normal capacity (20hr): 1.3Ah Terminal: E-T1 Dimensions: 96.5 x 45 x 59mm Weight: 0.6kg *Design may change without prior notice. Thank you for your understanding.
MORE -
PWMソーラー充電コントローラUSB出力付+鉛蓄電池 12V-1.3Ah
¥11,100
・弊社の昼間用ソーラーファン(商品番号:56360/56359)や昼間用ソーラーライト(商品番号:57769/57768)の中継に差し入れることで、ON/OFFスイッチ付で限定時間用途や夜間用に ・56359に使用した場合、2~3時間でフル充電可能で5~6時間ファンを駆動させることができます。バッテリーやソーラーセルを強化することでご自分の仕様のソーラー充電システム製造に ・USB出力付なので非常時のスマホ充電などにも ※防水仕様ではないので屋外で使用される場合は、ケースに収納するなど工夫が必要です。 コントローラ仕様: 公称システム電圧:12/24 VDC maxコントローラーへのバッテリー電圧:32 V 定格バッテリー電流:10A ※付属ケーブルをご使用の場合は、5A程度までとしてください 充電回路の電圧降下:<=0.26V 放電回路の電圧降下:<= 0.15V 自己浪費:<= 6mA 温度補正:-5 mV /℃/ 2 V 動作温度:-35℃~+55℃ 湿度:<=95%、結露しないこと USBポート:最大5 VDC 1.2 A 端子:4mmsq 寸法:約120.3 x 67 x 21.8 mm 取付穴の直径:約4.5 mm 重さ:約102 g 充電池仕様: 電圧: 12V 通常容量(20hr): 1.3Ah 端子: E-T1 寸法: 96.5 x 45 x 59mm 重量: 0.6kg ※付属のDCジャック付コードのコネクタは、5.5x2.1mmです。 ※写真のファンおよびワットメーター(商品番号:57001)は別売りです。本製品には付属しておりません。ちなみにこのパネルメーターをソーラー入力部と負荷接続部に取り付けますと入出力のバランスチェックに便利です。 57780 ------------------------------------------------------------------------------------------- PWM solar charging controller with USB output + lead acid battery 12V-1.3Ah - By inserting it into the relay of our daytime solar fan (product number: 56360/56359) or daytime solar light (product number: 57769/57768), it can be used for limited time use or nighttime use with an ON/OFF switch. - When used with 56359, it can be fully charged in 2 to 3 hours and can run the fan for 5 to 6 hours. By strengthening the battery and solar cell, you can create a solar charging system with your own specifications. - With USB output, it can also be used to charge smartphones in emergencies. * It is not waterproof, so if you use it outdoors, you will need to store it in a case or other ingenuity. Controller Specifications: Nominal system voltage: 12/24 VDC Maximum battery voltage to controller: 32 V Rated battery current: 10A *If using the included cable, limit to 5A Charging circuit voltage drop: <= 0.26V Discharging circuit voltage drop: <= 0.15V Self-dissipation: <= 6mA Temperature compensation: -5 mV/℃/ 2 V Operating temperature: -35℃ to +55℃ Humidity: <= 95%, non-condensing USB port: Maximum 5 VDC 1.2 A Terminal: 4mmsq Dimensions: Approx. 120.3 x 67 x 21.8 mm Mounting hole diameter: Approx. 4.5 mm Weight: Approx. 102 g Rechargeable battery specifications: Voltage: 12V Normal capacity (20hr): 1.3Ah Terminal: E-T1 Dimensions: 96.5 x 45 x 59mm Weight: 0.6kg *The connector of the included DC jack cord is 5.5x2.1mm. *The fan and wattmeter (product number: 57001) in the photo are sold separately. They are not included with this product.
MORE -
鉛蓄電池用充電器K8012(組立済)
¥8,580
SOLD OUT
・工作キット鉛蓄電池用充電器K8012の組立済品です。 ・6Vおよび12Vオープン/シールドタイプ鉛蓄電池対応 ・充電中ステータス表示、充電終了でフロート ・逆接続保護 ・トランス18V/25VA(別売)が必要です。 充電電流: 0.3もしくは1A (選択) PCB寸法: 97 x 140 x 40mm 50086-ass
MORE -
12V鉛蓄電池用充電セット-充電コントローラ+PSE認証電源
¥12,100
・PSE認証アダプターとソーラー充電モジュールを組み合わせた製品です ・バッテリー状態のLEDインジケータ ・シールド、ゲル、floodedの3種類のバッテリーをサポート ・温度補正、充電および放電設定の自動選択 ・保護:過負荷、短絡、過放電、過電圧、低電圧、逆極性 入力電圧:100~240Vac 公称システム電圧:12 VDC 定格バッテリー電流:<5A 充電回路の電圧降下:<=0.26V 放電回路の電圧降下:<= 0.15V 温度補正:-5 mV /℃/ 2 V 動作温度:-35℃〜+55℃ 湿度:<=95%、結露しないこと コントローラ寸法:約120.3 x 67 x 21.8 mm 認証:PSE ※予告なく製品のデザイン等変更されることがあります。ご了承ください。 58349 ------------------------------------------------------------------------------------------- Charging set for 12V lead-acid batteries - charging controller + PSE certified power supply - A product that combines a PSE certified adapter and a solar charging module - LED indicator for battery status - Supports three types of batteries: sealed, gel, and flooded - Temperature compensation, automatic selection of charge and discharge settings - Protection: overload, short circuit, over-discharge, overvoltage, low voltage, reverse polarity Input voltage: 100-240Vac Nominal system voltage: 12 VDC Rated battery current: <5A Voltage drop in charging circuit: <=0.26V Voltage drop in discharging circuit: <=0.15V Temperature compensation: -5 mV/℃/ 2 V Operating temperature: -35℃ to +55℃ Humidity: <=95%, non-condensing Controller dimensions: Approx. 120.3 x 67 x 21.8 mm Certification: PSE *Product design may change without notice. Please note.
MORE